Skip to content

See how to install PipeSnug…

Installing PipeSnug is incredibly simple and can be done in less than 5 seconds.

How to install 32mm & 40mm PipeSnug

Core drill (or use existing) 52mm hole
Core drill (or use existing) 52mm hole
Push PipeSnug into hole
Push PipeSnug into hole
Install pipework as normal, no need for any additional silicone or adhesive
Install pipework as normal, no need for any additional silicone or adhesive
Decide what to do with all your saved time!
Decide what to do with all your saved time!
32mm40mm_video_poster2

How to install 110mm PipeSnug

Core drill (or use existing) 152mm hole
Core drill (or use existing) 152mm hole
Push PipeSnug into hole
Push PipeSnug into hole
Install pipework as normal, no need for any additional silicone or adhesive
Install pipework as normal, no need for any additional silicone or adhesive
Enjoy a cuppa!
Enjoy a cuppa!
110mm_video_poster

How to install FlueSnug

Core drill (or use existing) 152mm hole
Core drill (or use existing) 152mm hole
Push FlueSnug into hole – either from the inside or the outside
Push FlueSnug into hole – either from the inside or the outside
Push flue through either from inside or outside, no need for any additional mortar, silicone, etc.
Push flue through either from inside or outside, no need for any additional mortar, silicone, etc.
Sit back and admire your handywork!
Sit back and admire your handywork!
fluesnug_video_poster

FlueSnug can also be installed from the inside, which is perfect for installations at height, saving the cost of scaffolding or a cherry picker.  Take a look at this video to see how:

fluesnug_from_inside_video_poster